< BACK TO PRODUCTS

DJI Zenmuse L1

A Lidar + RGB Solution for Aerial Surveying


The Zenmuse L1 integrates a Livox Lidar module, a high-accuracy IMU, and a camera with a 1-inch CMOS on a 3-axis stabilized gimbal. When used with Matrice 300 RTK and DJI Terra, the L1 forms a complete solution that gives you real-time 3D data throughout the day, efficiently capturing the details of complex structures and delivering highly accurate reconstructed models.

Livox Lidar Module

  • Frame Lidar with up to 100% effective point cloud results
  • Detection Range: 450m (80% reflectivity, 0 klx) / 190 m (10% reflectivity, 100 klx)
  • Effective Point Rate: 240,000 pts/s
  • Supports 3 Returns
  • Line Scan Mode and Non-repetitive Scan Mode

RGB Camera

  • 20MP
  • 1-inch CMOS
  • Mechanical Shutter

High-accuracy IMU

  • Accuracy: 0.025° (roll/pitch) / 0.08° (yaw)
  • Vision Sensor for Positioning Accuracy
  • GNSS, IMU, RGB Data Fusion


Point Cloud LiveView

Real-time point clouds provide immediate insights onsite, so operators are informed to make critical decisions quickly.
You can also verify fieldwork quality by checking point cloud data immediately after each flight.

Exceptional Efficiency
Generate true-color point cloud models in real-time, or acquire 2 km2 of point cloud data in a single flight [1] using the Livox frame Lidar module with a 70° FOV and a visible light camera with a 1-inch sensor.

Unparalleled Accuracy
Render centimeter-accurate reconstructions thanks to the high-accuracy IMU, a vision sensor for positioning accuracy, and the incorporation of GNSS data.

Ready When You Are
The IP44 rating allows the L1 to be operated in rainy or foggy environments. The Lidar module’s active scanning method enables you to fly at night.

Ideal for the following:
Surveys
INQUIRE ABOUT THIS PRODUCT DOWNLOAD DATASHEET

SIMILAR PRODUCTS

NEED ASSISTANCE ON THE BEST PRODUCT FOR YOUR BUSINESS?

Falcon Eye Drones are happy to consult with you to fully understand your needs. Contact us below and one of our team members will be in touch to assist.
I agree to the occasional email sent by FEDS